
Hearth Residential ESS
白天的光,存进夜晚。
8–32 kWh 模块化堆叠户用储能,分高压一体与低压堆叠两类架构,用于家庭、农舍与乡村场所的日内光伏时移和关键回路备电。
Hearth 户用储能
户用与家庭储能 · 8–32 kWh 模块化堆叠
它,住在每一种家里。
从城市别墅到高用电家庭,用一套产品覆盖家庭储能的主要场景。




逐项对比,按需选型。
机型
容量与电压
标称容量
Hearth 8
8 kWh
- 单机一体,无需外接电池柜
Hearth 16 Stack
16 kWh
- 8038.4 Wh × 2 模块
Hearth 16 FS
16 kWh
- 单柜一体
电压平台
Hearth 8
550 V 高压
- 配高压混合逆变器
Hearth 16 Stack
51.2 V 低压
- 配低压混合逆变器
Hearth 16 FS
51.2 V 低压
- 配低压混合逆变器
电气性能
持续充放
Hearth 8
0.5P(充 / 放)
- 峰值 4 kW
Hearth 16 Stack
120 A(0.3P @25℃)
- 峰值 205 A
Hearth 16 FS
120 A(0.3P @25℃)
- 峰值 205 A
额定功率
Hearth 8
—
Hearth 16 Stack
5 kW
Hearth 16 FS
—
循环寿命
≥6000 cycles @80% DOD
备电预留
Reserved per selected SOC window
电池与 BMS
电芯体系
LFP · 314 Ah
- Same large-format cells across the series, for higher pack energy density and slower degradation
放电深度
≤ 90% DOD
- Recommended operating window
BMS
Touchscreen · dual RS485
- Passive balancing
- SOC / SOH accuracy ≤1%
- 7-channel temperature monitoring
通信
Hearth 8
CAN / RS485
- 适配高压混合逆变器,兼容清单详询
Hearth 16 Stack
CAN / RS485
- 适配低压混合逆变器,兼容清单详询
Hearth 16 FS
CAN / RS485
- 适配低压混合逆变器,兼容清单详询
结构与防护
防护等级
IP65
- Natural-convection cooling, fanless and silent
安装方式
Hearth 8
堆叠式
Hearth 16 Stack
堆叠式
Hearth 16 FS
落地式
- 靠墙安装
机身尺寸[1]
Hearth 8
988 × 300 × 278 mm
- 宽:988 mm
- 深:300 mm
- 高:278 mm
Hearth 16 Stack
700 × 350 × 260 mm
- 宽:700 mm
- 深:350 mm
- 高:260 mm
Hearth 16 FS
550 × 860 × 175 mm(G1)
- 宽:550 mm
- 深:860 mm
- 高:175 mm
重量
Hearth 8
85 kg
Hearth 16 Stack
约 170 kg
Hearth 16 FS
约 140 kg
运行环境
全部机型
- Installation:Indoor / outdoor (IP65)
- Charging temperature:0 ~ 55 °C
- Discharging temperature:-20 ~ 55 °C
- Cooling:natural convection, fanless and silent
扩展能力
并联扩展
Hearth 8
每串最多 6 模块
- 系统最多 16 模块
Hearth 16 Stack
2 台起并联
- 最多 16 台 + DC Combiner
Hearth 16 FS
2 台起并联
- 最多 16 台 + DC Combiner
选型提示
Invest in stages based on load and EV needs
- Start with 2 units for the current load, expand in parallel as needed
- Select based on the exact model and inverter pairing; do not commit to runtime from capacity alone
合规与认证
全部机型
- IEC series:IEC 62619
- Transport:UN38.3
- Grid / local:per project location regulations
- Approved inverters:per model mapping list
- Circuit breaker (16 Stack):NDB1-125C125/1+MX+OF (UL1077)
[1] 机身尺寸为「宽 × 深 × 高」,不含安装间隙与管路线槽。
全系列电芯体系、BMS、通信接口、防护等级与运行温度为共有口径,逐列重复仅为便于横向对比;窄屏下表格自动按机型堆叠显示。





