Hearth 16 FS
Slim floor-standing home ESS

A slim floor-standing energy buffer for farms, small businesses and service spaces where wall loading, cabinet depth or maintenance access constrains the project.

Product features

What one unit can do

16units parallel expansion limit

Parallel from 2 units

314Ah large-format cells

Same large-format cells across the series, for higher pack energy density and slower degradation

205A peak output

120 A (0.3P @25 °C)

integrated BMS

Touchscreen · dual RS485

IP65 protected, fanless

Natural-convection cooling, fanless and silent

inverter compatibility

CAN / RS485

Project fit

Start with the voltage window and the inverter pairing

Hearth 16 FS is a slim floor-standing 16 kWh low-voltage all-in-one unit. Selection comes down to the voltage window, protocol, power and current limits, usable-energy target, installation environment and the approved inverter list.

Typical scenarios

Slim floor-standing: big capacity in tight spaces

  • Home backupKeep critical circuits (fridge, lighting, comms, medical devices) running through a grid outage
  • Self-consumptionStore rooftop PV surplus in the battery and release it at night, raising self-use and lowering bills
  • Low-voltage hybrid inverter systemsThe 51.2 V platform pairs with mainstream low-voltage hybrid inverters; PV, battery and grid designed as one
  • Limited wall loadFloor-standing and self-supporting, so no wall mounting is needed; it can be installed even where walls cannot take drilled loads
  • Narrow-space installationThe 550 × 860 × 175 mm slim enclosure sits against the wall, so it fits balcony sides, corridors and plant rooms
Request a tailored plan
Core data
0VLow-voltage safe platform
0kWhNominal energy
0mmUltra-slim enclosure thickness
0cyclesCycle life @80% DOD

LFP 314 Ah large-format cells · IP65 natural convection · BMS delivered as one unit

Specifications

Hearth 16 FS detailed specifications

Model

Model code
ZT-REES-LV-FS-16k-G1
Architecture
Low-voltage slim floor-standing
Form factor
Low-voltage floor-standing · wall-adjacent

Capacity & voltage

Nominal capacity
16 kWh
Voltage platform
51.2 V low voltage

Electrical performance

Continuous charge / discharge
120 A (0.3P @25 °C)
Rated power
—
Cycle life
≥6000 cycles @80% DOD
Backup reserve
Reserved per selected SOC window

Battery & BMS

Cell chemistry
LFP · 314 Ah Same large-format cells across the series, for higher pack energy density and slower degradation
Depth of discharge
≤ 90% DOD Recommended operating window
BMS
Touchscreen · dual RS485 Passive balancing SOC / SOH accuracy ≤1% 7-channel temperature monitoring
Communication
CAN / RS485

Structure & protection

Ingress protection
IP65 Natural-convection cooling, fanless and silent
Mounting
Floor-standing
Dimensions
550 × 860 × 175 mm (G1)
Weight
Approx. 140 kg

Operating environment

All models
Installation:Indoor / outdoor (IP65) Charging temperature:0 ~ 55 °C Discharging temperature:-20 ~ 55 °C Cooling:natural convection, fanless and silent

Scalability

Parallel expansion
Parallel from 2 units
Selection notes
Invest in stages based on load and EV needs Start with 2 units for the current load, expand in parallel as needed Select based on the exact model and inverter pairing; do not commit to runtime from capacity alone

Compliance & certification

All models
IEC series:IEC 62619 Transport:UN38.3 Grid / local:per project location regulations Approved inverters:per model mapping list Circuit breaker (16 Stack):NDB1-125C125/1+MX+OF (UL1077)